MNT Lab

MNT Lab

Publications

Books

  1. Microfluidics and Nanofluidics Handbook: Chemistry, Physics, and Life Science Principles, Editors: S. K. Mitra and S. Chakraborty, CRC Taylor Francis, No. of Pages: 1125, September 6 2011, ISBN# 9781439816769.
  2. Microfluidics and Nanofluidics Handbook: Fabrication, Implementation, and Applications, Editors: S. K. Mitra and S. Chakraborty, CRC Taylor Francis, No. of Pages: 641, September 6 2011, ISBN# 9781439816721.

Book Chapters

  1. P. Waghmare and S. K. Mitra, “Capillary Flow”, Encyclopedia of Nanotechnology, Chapter 396, Springer, 2012.
  2. A. Saha and S. K. Mitra, “Pressure driven flows in microchannels”, Microfluidics and Nanofluidics Handbook, Chapter 5, Vol-I, CRC-Taylor Francis, 2011.
  3. A. M. Koupaei, S. K. Mitra and M. Secanell, “Diffusion in micro and nano capillaries”, Microfluidics and Nanofluidics Handbook, Chapter 12, Vol-I, CRC-Taylor Francis, 2011.
  4. D. Nobes, M. Abdolrazaghi, and S. K. Mitra, “Experimental methods is microfluidics”, Microfluidics and Nanofluidics Handbook, Chapter 1, Vol-II, CRC-Taylor Francis, 2011.
  5. N. S. K. Gunda and S. K. Mitra, “Dielectrophoresis for manipulation of biomolecules”, Biomedical Engineering, Chapter 17, pp. 335 – 354, InTech, Vienna, 2011.
  6. A. Saha and S. K. Mitra, “Modeling and simulation of micro-scale flows”, Recent Advances in Modeling and Simulation, pp. 283 – 316, InTech, Vienna, 2008.
  7. S. K. Mitra and A. Saha, “Methods for Surface Modification”, Encyclopedia of Microfluidics and Nanofluidics, pp. 1932 – 1938, Springer-Verlag Heidelberg, 2008.

Referred Journal Articles

(Students underlined)
  1. B. N. Sahoo, N. S. K. Gunda, S. Nanda, J. Kozinski, and S. K. Mitra, “Development of dual phobic surfaces: Superamphiphobicity in air and oleophobicity in underwater”, ACS Sustainable Chemistry & Engineering, DOI: 10.1021/acssuschemeng.7b00969, 2017.
  2. P. P. S. Seerha,P. Kumar, A. K. Das, and S. K. Mitra, “Proposition of stair climb of a drop using chemical wettability gradient”, Physics of Fluids, Vol. 29, 072103, 2017.
  3. D. Orejon, O. Shardt, N. S. K. Gunda, T. Ikuta, K. Takahashi, Y. Takata, and S. K. Mitra, “Simultaneous Dropwise and Filmwise Condensation on Hydrophilic Microstructured Surfaces”, Int. J. Heat & Mass Transfer, Vol. 114, pp. 187-197, 2017.
  4. B. N. Sahoo, S. Nanda, J. Kozinski, and S. K. Mitra, “PDMS/camphor soot composite coating: Towards a self-healing and a self-cleaning superhydrophobic surface”, RSC Advances, Vol. 7, pp. 15027 – 15040, 2017.
  5. P. Kumar, A. K. Das, and S. K. Mitra, “Bending and growth of entrained air filament under converging and asymmetric rotational fields”, Physics of Fluids, Vol. 29, 022101, 2017.
  6. S. Mitra, N. S. K. Gunda, and S. K. Mitra, “Wetting characteristics of underwater micro-patterned surfaces”, RSC Advances, Vol. 7, pp. 9064 – 9072, 2017.
  7. S. Dasgupta, N. S. K. Gunda, and S. K. Mitra, “Fishing, trapping and killing of Escherichia coli (E. coli) in potable water ”, Environmental Science: Water Research & Technology, Vol. 2, pp. 931-941, 2016 (Cover Article).
  8. S. Mitra and S. K. Mitra, “Understanding the early regime of drop spreading”, Langmuir, Vol. 32, pp. 8843 – 8848, 2016 (Cover Article).
  9. P. Kumar, A. K. Das, and S. K. Mitra, “Physical understanding of gas-liquid annular flow and its transition to dispersed droplets”, Physics of Fluids, Vol. 28, 072101, 2016.
  10. O. Shardt , S. K. Mitra and J. J. Derksen, “Simulations of charged droplet collisions in shear flow”, Chemical Engineering Journal, Vol. 302, pp. 314-322, 2016.
  11. N. S. K. Gunda, R. Chavali, and S. K. Mitra, “Hydrogel based rapid test method for detection of Escherichia coli (E.coli) in contaminated water samples”, Analyst, Vol. 141, pp. 2920 – 2929, 2016 (Cover Article).
  12. D. Orejon, O. Shardt, P. R. Waghmare, N. S. K. Gunda, Y. Takata, and S. K. Mitra, “Droplet migration during condensation on chemically patterned micropillars”, RSC Advances, Vol. 6, pp. 36698 – 36704, 2016.
  13. S. Nanda, S. N. Reddy, S. K. Mitra, and J. Kozinski, “The progressive routes for carbon capture and sequestration”, Energy Science & Eng.,Vol. 4, pp. 99 – 122, 2016.
  14. S. Bhaduri, N. Debnath, S. K. Mitra, Y. Liu and A. Kumar, “Microbiologically Induced Calcite Precipitation Mediated by Sporosarcina pasteurii”, J. Vis. Exp., Vol. 110, e53253, DOI:10.3791/53253, 2016.
  15. S. Dasgupta, N. S. K. Gunda, and S. K. Mitra, “Evaluation of the antimicrobial activity of Moringa oleifera seed extract as a sustainable solution for potable water”, RSC Advances, Vol. 6, pp. 25918 – 25926, 2016.
  16. G. Senthamaraikkannan, K. Budwill, I. Gates, S. K. Mitra, and V. Prasad, “Kinetic modeling of the biogenic production of coalbed methane”, Energy Fuels, Vol. 30, pp. 871–883, 2016.
  17. L. Pant, S. K. Mitra, and M. Secanell, “Multigrid hierarchical simulated annealing method for reconstructing heterogeneous media”, Physical Review E, Vol. 92, 063303, 2015.
  18. R. Chavali, N. S. K. Gunda, S. Naicker and S. K. Mitra, “Rapid detection of fluoride in potable water using a novel flurogenic compound – 7‐0‐tert‐butyldiphenylsilyl‐4‐methylcoumarin”, Analytical Chemistry Research , Vol. 6, pp. 26 – 31, 2015.
  19. P. Waghmare, S. Mitra, N. S. K. Gunda, and S. K. Mitra, “Needle-free drop deposition: Role of elastic membranes”, RSC Advances, Vol. 5, pp. 82374 – 82380, 2015.
  20. S. Mitra and S. K. Mitra, “Symmetric drop coalescence on an under-liquid substrate”, Physical Review E, Vol. 92, 033013, 2015.
  21. A. Bandopadhyay, D. DasGupta, S. K. Mitra, and S. Chakraborty, “Computation of streaming potential in porous media: Modified permeability tensor”, J. Computational Physics, Vol. 300, pp. 53 – 69, 2015.
  22. S. Dasgupta, R. Chavali, N. S. K. Gunda, and S. K. Mitra, “Hollow fiber concentrator for Water Quality Monitoring: Role of surfactant based elusion fluids”, RSC Advances, Vol. 5, pp. 62439 – 62448, 2015.
  23. M. Rahimi, I. Chae, J. E. Hawk, S. K. Mitra, and T. Thundat, “Methane Sensing at Room Temperature Using Photothermal Cantilever Deflection Spectroscopy”, Sensors & Actuators B: Chemical, Vol. 31, pp. 564 – 569, 2015.
  24. L. Pant, H. Huang, M. Secanell, S. Larter, and S. K. Mitra, “Multi scale characterization of coal structure for mass transport”, Fuel, Vol. 159, pp. 315 – 323, 2015.
  25. P. Mangal, L. Pant, N. Carrigy, M. Dumontier, V. Zingan, S. K. Mitra, and M. Secanell, “Experimental study of mass transport in PEMFCs: Through plane permeability and molecular diffusivity in GDLs”, Electrochemica Acta, Vol. 167, pp. 160 – 171, 2015.
  26. W. Zhang,P. Waghmare, X. Xu, L. Chen, and S. K. Mitra, “Rheology and wetting properties of deamidated barley proteins”, Food Hydrocolloids, Vol. 43, pp. 400 – 4009, 2015.
  27. P. Waghmare, N. S. K. Gunda and S. K. Mitra, “Under-water superoleophobicity of fish scales”, Scientific Reports, Nature Publishing Group, Vol. 4, 7454, 2014.
  28. O. Shardt, S. K. Mitra, and J. Derksen, “The Critical Conditions for Coalescence in Phase Field Simulations of Colliding Droplets in Shear”, Langmuir, Vol. 30, pp. 14416 – 14426, 2014.
  29. S. Das, S. Chanda, J. C. T. Eijkel, N. R. Tas, S. Chakraborty, and S. K. Mitra, “Filling of charged cylindrical capillaries”, Physical Review E, Vol. 90, 043011, 2014.
  30. P. Waghmare and S. K. Mitra, “Needle-free drop deposition technique for contact angle measurements of superhydrophobic surfaces”, J. Applied Physics, Vol. 116, 114903, 2014.
  31. A. Baldygin, D. Nobes, and S. K. Mitra, “A new laboratory core flooding experimental system”, Industrial & Engineering Chemistry Research, Vol. 53, pp. 13497 – 13505, 2014.
  32. L. Pant, S. K. Mitra, and M. Secanell, “Stochastic reconstruction using multiple correlation functions with different-phase-neighbor-based pixel selection”, Physical Review E, Vol. 90, 023306, 2014.
  33. S. Farsinezhad, P. Waghmare, B. Wiltshire, S. Amiri, S. K. Mitra, and K. Shankar, “Amphiphobic surfaces from functionalized TiO2 nanotube arrays”, RSC Advances, Vol. 4, pp. 33587 – 33598, 2014.
  34. A. Baldygin, D. Nobes, and S. K. Mitra, “Water-Alternate-Emulsion (WAE): A new technique for enhanced oil recovery”, J. Petroleum Sci. & Eng., Vol. 121, pp. 167 – 173, 2014.
  35. N. S. K. Gunda, S. Naicker, S. Shinde, S. Kimbahune, S. Shrivastava, and S. K. Mitra, “Mobile Water Kit (MWK): A Smartphone Compatible Low-Cost Water Monitoring system for rapid detection of total coliform and E. coli”, Analytical Methods, Vol. 6, pp. 6236 – 6246 , 2014 (Cover Article).
  36. R. Chavali, N. S. Gunda, S. Naicker, and S. K. Mitra, “Detection of Escherichia coli in potable water using personal glucose meters”, Analytical Methods, Vol. 6, pp.6223 – 6227, 2014 (Back Cover Article).
  37. A. Stephen, A. Adebusuyi, A. Baldygin, J. Shuster, G. Southam, K. Budwill, J. Foght, D. S. Nobes, and S. K. Mitra, “Bioconversion of Coal: New Insights from a Core Flooding Study”, RSC Advances, Vol. 4, pp. 22779 – 22791, 2014 (Research Highlight in Chemistry World, Royal Society of Chemistry).
  38. N. S. K. Gunda, M. Singh, L. Norman, K. Kaur, and S. K. Mitra, “Optimization and characterization of biomolecule immobilization on silicon substrates using (3-aminopropyl) triethoxy silane (APTES) and glutaraldehyde linker”, Applied Surface Science, Vol. 305, pp. 522-530, 2014.
  39. O. Shardt, P. Waghmare, J. Derksen, and S. K. Mitra, “Inertial rise in short capillary tubes”, RSC Advances, Vol. 4, pp. 14781 – 14785, 2014.
  40. D. Sarkar, N. S. K. Gunda, I. Jamal, and S. K. Mitra, “Optical biosensors with an integrated Mach-Zehnder Interferometer for detection of Listeria monocytogenes”, Biomedical Microdevices, Vol. 16, pp. 509 – 520, 2014.
  41. R. Gaikwad, A. Hande, S. Das, S. K. Mitra, and T. Thundat, “Determination of Charge on Asphaltene Nano-aggregates in Air Using Electrostatic Force Microscopy”, Langmuir, Vol. 31, pp. 679 – 684, 2014.
  42. S. Das, T. Thundat, and S. K. Mitra, “Asphaltene migration and separation in presence of aggregation in electroosmotic-electrophoretic transport”, Colloids Surfaces A, Vol. 446, pp. 23 – 32, 2014.
  43. M. Mehranfar, R. Gaikwad, S. Das, S. K. Mitra, and T. Thundat, “Effect of Temperature on Morphologies of Evaporation-triggered Asphaltene Nano-aggregates”, Langmuir, Vol. 30, pp. 800 – 804, 2014.
  44. N. S. K. Gunda and S. K. Mitra, “Challenges and Opportunities for Capillary based Biofunctionalization of microcantilever arrays”, Journal of Electrochemical Society, Vol. 161, pp. B3167 – B3172, 2014.
  45. O. Shardt, J. Derksen, and S. K. Mitra, “Simulations of Janus Droplets at Equilibrium and in Shear”, Physics of Fluids, Vol. 26, 012104, 2014.
  46. P. Waghmare, S. Das, and S. K. Mitra, “Drop deposition on under-liquid low energy surfaces”, Soft Matter, Vol. 9, pp. 7437-7447, 2013 (Cover Article).
  47. P. Waghmare, S. Das, and S. K. Mitra, “Under-water superoleophobic Glass: Unexplored role of the surfactant-rich solvent”, Scientific Reports, Nature Publishing Group, Vol. 3, 1862, 2013.
  48. A. Guha, S. Das, and S. K. Mitra, “Exploring new scaling regimes for streaming potential and electroviscous effects in a nanocapillary with overlapping Electric Double Layers”, Analytica Chemica Acta, Vol. 804, pp. 159 – 166, 2013.
  49. D. Sarkar, I. Jamal, and S. K. Mitra, “Analysis, Design and Fabrication of optical waveguides for Mach-Zehnder Interferometry”, Optics Comm., Vol. 311, pp. 338-345, 2013.
  50. N. S. K. Gunda, M. Singh, Y. Purwar, S. L. Shah, K. Kaur, and S. K. Mitra, “Micro-Spot with Integrated Pillars (MSIP) for Detection of Dengue NS1virus”, Biomedical Microdevices, Vol. 15, pp. 959 – 971, 2013.
  51. S. Das and S. K. Mitra, “Electrical double-layer interactions in a wedge geometry: Change in contact angle for drops and bubbles”, Physical Review E, Vol. 88, 033021, 2013.
  52. S. Das and S. K. Mitra, “Different regimes in vertical capillary filling”, Physical Review E, Vol. 87, 063005, 2013.
  53. J. Joseph, N. S. K. Gunda, and S. K. Mitra, “On-chip Porous Media: Porosity and permeability measurements”, Chem. Eng. Sci., Vol. 99, pp. 274-283, 2013.
  54. O. Shardt, J. Derksen, and S. K. Mitra, “Simulations of droplet coalescence in simple shear flow”, Langmuir, Vol. 29, pp. 6201–6212, 2013.
  55. A. Bandopadhyay, D. DasGupta, S. K. Mitra, and S. Chakraborty, “Electro-osmotic flows through topographically complicated porous media: Role of electropermeability tensor”, Physical Review E, Vol. 87, 033006, 2013.
  56. R. Mishra, S. Das, and S. K. Mitra, “Electric double layer force between charged surfaces: Effect of solvent polarization”, J. Chem. Phys., Vol. 138, 114703, 2013.
  57. S. Das, S. Chakraborty, and S. K. Mitra, “Contribution of interfacial electrostriction in surface tension”, J. Colloid Interface Sci., Vol. 400, pp. 130 – 134, 2013.
  58. A. Gunde, T.Babadagli, and S. K. Mitra, “Pore-scale interfacial dynamics and oil-water relative permeabilities of capillary driven counter-current flow in fractured porous media”, J. Petroleum Sci. Eng., Vol. 103, pp. 106 – 114, 2013.
  59. L. Pant, S. K. Mitra, and M. Secanell, “A generalized mathematical model to study gas transport in PEMFC porous media”, Int. J. Heat Mass Transfer, Vol. 58, pp. 70 – 79, 2013.
  60. S. Das, T. Thundat, and S. K. Mitra, “Analytical model of zeta potential of asphaltenes”, Fuel, Vol. 108, pp. 543 – 549, 2013.
  61. N. Carrigy, L. Pant, S. K. Mitra, and M. Secanell, “Knudsen diffusivity and permeability of PEMFC microporous coated gas diffusion layers for different polytetrafluoroethylene loadings”, Journal Electrochemical Society, Vol. 160, pp. F81-F89, 2013.
  62. N. S. K. Gunda, J. Joseph, A. Tamayol, M. Akbari, and S. K. Mitra, “Measurement of pressure drop and flow resistance in microchannels with integrated micropillars”, Microfluidics Nanofluidics, Vol. 14, pp. 711 – 721, 2013.
  63. P. Waghmare and S. K. Mitra, “Contact angle hysteresis of Bovine Serum Albumin (BSA) solution/metal (Au-Cr) coated glass substrate”, Colloid Polymer Science, Vol. 291, pp. 375-381, 2013.
  64. R. N. Patil, M. Vinjamur and S. K. Mitra, “The optimization of the length of Horizontal Wells for Bottom Water Reservoir Conditions”, Energy Sources: Part A, Vol. 35, pp. 2337-2347, 2013.
  65. S. Das, P. Waghmare, and S. K. Mitra, “Early regimes of capillary flow”, Physical Review E, Vol. 86, 067301, 2012.
  66. S. Das, S. K. Mitra, and S. Chakraborty, “Ring stains in the presence of electromagnetohydrodynamic interactions”, Physical Review E, Vol. 86, 056317, 2012.
  67. N. S. K. Gunda, S. Bhattacharjee and S. K. Mitra, “Study on the use of dielectrophoresis and electrothermal forces to produce on-chip micromixers and microconcentrators”, Biomicrofluidics, 6, 034118, 2012.
  68. S. Das, R. Mishra, T. Thundat, S. Chakraborty, and S. K. Mitra, “Modeling of asphaltene transport in presence of finite aggregation effects in pressure-driven microchannel flow”, Energy Fuels, Vol. 26, pp. 5851–5857, 2012.
  69. S. Das, S. K. Mitra and S. Chakraborty, “Wenzel and Cassie-Baxter states of an electrolyte drop on charged surfaces”, Physical Review E, 86, 011603, 2012.
  70. S. Das, P. Waghmare, M. Fan, N. S. K. Gunda, S. Roy, and S. K. Mitra, “Dynamics of liquid droplets in an evaporating drop: Liquid droplet “Coffee Stain” effect”, RSC Advances, Vol. 2, pp. 8390-8401, 2012.
  71. S. Das, S. Chakraborty, and S. K. Mitra, “Redefining electrical double layer thickness in narrow confinements: Effect of solvent polarization”, Physical Review E, Vol. 85, 051508, 2012 [Selected for Virtual Journal of Nanoscale Science & Technology, Vol. 25, 2012].
  72. N. Soin, S. Roy, S. K. Mitra, T. Thundat, and J. McLaughlin, “Nanocrystalline Ruthenium Oxide dispersed few layered graphene (FLG) nanoflakes as supercapacitor electrodes”, J. Materials Chemistry, Vol. 22, pp. 14944 – 14950, 2012.
  73. S. Das, S. Chakraborty, and S. K. Mitra, “Magnetohydrodynamics in narrow fluidic channels in presence of spatially non-uniform magnetic field: framework for combined magnetohydrodynamic and magnetophoretic particle transport”, Microfluidics Nanofluidics, Vol. 13, pp. 799 -807, 2012.
  74. C. Guthy, C. W. Van Neste, S. K. Mitra, S. Bhattacharjee, and T. Thundat, “Parametric energy conversion of thermoacoustic vibrations”, Applied Physics Letter, Vol. 100, 203902, 2012.
  75. S. Das, S. Chakraborty and S. K. Mitra, “Ring stains in the presence of electrokinetic interactions”, Physical Review E, Vol. 85, 046311, 2012.
  76. S. Gajapathi, S. K. Mitra and P. Mendez, “Part – I: Development of a new heat source model applicable to micro Electron Beam Welding”, Science and Technology of Welding and Joining, Vol. 17, pp. 429-434, 2012.
  77. S. Gajapathi, S. K. Mitra and P. Mendez, “Part – II: Application of Kanaya-Okayama heat source in modeling micro Electron Beam Welding”, Science and Technology of Welding and Joining, Vol. 17, pp. 435-440, 2012.
  78. N. Hadia, S. K. Mitra and M. Vinjamur, “Estimation of permeability heterogeneity in limestone outcrop by pressure measurements: Experiment and numerical simulation”, Experimental Thermal Fluid Science, Vol. 40, pp. 177 – 184, 2012.
  79. O. Shardt, S. K. Mitra and J. Derksen, “Lattice Boltzmann simulations of pinched flow fractionation”, Chem. Eng. Sci., Vol. 75, pp. 106 – 119, 2012.
  80. B. Bera, N. S. K. Gunda, S. K. Mitra and D. Vick, “Characterization of nanometre-scale porosity in reservoir carbonate rock by Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM)”, Microscopy Microanalysis, Vol. 18, pp. 171 – 178, 2012.
  81. A. Mathur, S. Wadhwa, S. Roy, S. C. Ray, D. Misra, S. K. Mitra, J. McLaughlin, and T. Thundat “Substrate effects on growth of MWCNTs by thermal chemical vapor deposition”, Advanced Science Letters, Vol. 7, pp. 21-26, 2012.
  82. A. Mathur, S. S. Roy, K. S. Hazra, S. Wadhwa, S. C. Ray, S. K. Mitra, and J. McLaughlin, “Oxygen plasma assisted end-opening and field emission enhancement in vertically aligned multiwall carbon nanotubes”, Materials Chemistry Physics, Vol. 134, pp. 425 – 429, 2012.
  83. N. Soin, S. S. Roy, S. C. Ray, P. Lemoine, A. Rahman, P. Maguire, S. K. Mitra, and J. McLaughlin, “Thickness dependent electronic structure of ultra thin tetrahedral amorphous carbon (ta-C) films”, Thin Solid Films, Vol. 520, pp. 2909 – 2915, 2012.
  84. L. Pant, S. K. Mitra, and M. Secanell, “Absolute permeability and Knudsen diffusivity measurements in PEMFC gas diffusion layers and micro porous layers”, J. Power Sources, Vol. 206, pp. 153-160, 2012.
  85. D. Sen, D. Nobes, and S. K. Mitra, “Optical measurement of pore scale velocity field inside micro porous media”, Microfluidics Nanofluidics, Vol. 12, pp. 189 – 200, 2012.
  86. R. Chatterjee, S. Bhattacharjee, and S. K. Mitra, “Particle transport in patterned cylindrical microchannels”, Microfluidics Nanofluidics, Vol. 12, pp. 41 – 51, 2012.
  87. P. Waghmare and S. K. Mitra, “A comprehensive theoretical model of capillary transport in rectangular microchannels”, Microfluidics Nanofluidics, Vol. 12, pp. 53 – 63, 2012.
  88. N. S. K. Gunda, B. Bera, N. Karadimitriou, S. K. Mitra and S. M. Majid Hassanizadeh, “Reservoir-on-a-Chip (ROC): A new paradigm in Reservoir Engineering”, Lab Chip, Vol. 11, 3785 – 3792, 2011 (Featured Article, Research Highlight from Royal Society of Chemistry 2011).
  89. S. S. Gajapathi, S. K. Mitra, and P. Mendez, “Controlling heat transfer in micro electron beam welding using volumetric heating”, Int. J. Heat Mass Transfer, Vol. 54, pp. 5545 – 5553, 2011.
  90. L. Pant, M. Secanell, and S. K. Mitra, “Modified multi-component gas transport formulation with phoretic effects”, Microfluidics Nanofluidics, Vol. 11, pp. 725 – 742, 2011.
  91. R. Chatterjee, S. K. Mitra, and S. Bhattacharjee, “Particle deposition onto janus and patchy spherical collectors”, Langmuir, Vol. 27, pp. 8787-8797, 2011.
  92. A. Mathur, S. Wadhwa, M. Tweedie, K.S. Hazra, C. Dickinson, S.S. Roy, S.K. Mitra, D. Misra, J. McLaughlin, “A comparative study of the growth, microstructural and electrical properties of multiwall CNTs grown by thermal and microwave plasma enhanced CVD methods”, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, pp. 29 – 36, 2011.
  93. M. Anisur Rahman, N. Soin, P. Maguire, R. D’Sa, S.S. Roy, C. Mahony, P. Lemoine, R. McCann, S.K. Mitra, and J. McLaughlin, “Structural and surface energy analysis of nitrogenated ta-C films”, Thin Solid Films, Vol. 520, pp. 294 – 301, 2011.
  94. F. Tavakoli, S. K. Mitra, and J. S. Olfert, “Aerosol penetration in microchannels”, Journal Aerosol Science, Vol. 42, pp. 321-328, 2011.
  95. N. S. K. Gunda , H. Choi, A. Berson, B. Kenney, K. Karan, J. G. Pharaoh and S. K. Mitra, “Focused Ion Beam – Scanning Electron Microscopy on Solid-Oxide Fuel-Cell Electrode: Image analysis and computing effective transport properties”, Journal Power Sources, Vol. 196, pp. 3592-3603, 2011.
  96. B. Bera, S. K. Mitra and D. Vick, “Understanding the microstructure of Berea Sandstone by the simultaneous use of Micro-Computed Tomography (micro-CT) and Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM)”, Micron, Vol. 42, pp. 412-418, 2011.
  97. L. Chaudhari, N. Hadia, S. K. Mitra and M. Vinjamur, “Flow Visualization of Two Phase Flow through Layered Porous Media”, Energy Sources: Part A, Vol. 33, pp. 948 – 958, 2011.
  98. P. Deshmukh, S. K. Mitra and U. N. Gaitonde, “Investigation of natural convection in cavities with uniform heat generation for different Prandtl number fluids”, Int. J. Heat Mass Transfer, Vol. 54, pp.1465-1474, 2011.
  99. A. Mohammadpour, P. Waghmare, S. K. Mitra and K. Shankar, “Anodic Growth of Large-Diameter Multipodal TiO2 Nanotubes”, ACS Nano, Vol. 4, pp. 7421–7430, 2010.
  100. P. Waghmare and S. K. Mitra, “Contact angle hysteresis of microbead suspensions”, Langmuir, Vol. 26, pp. 17082–17089, 2010.
  101. P. Waghmare and S. K. Mitra, “Finite reservoir effect on capillary flow of microbead suspension in rectangular microchannels”, J. Colloid Interface Science, 351, pp. 561 – 569, 2010.
  102. A. Gunde, B. Bera and S. K. Mitra, “Investigation of water and CO2 flooding using micro-CT images of Berea Sandstone core using Finite Element Simulations”, Energy, Vol. 35, pp. 5209 – 5216, 2010.
  103. P. Waghmare and S. K. Mitra, “On the derivation of pressure field distribution at the entrance of a rectangular capillary”, ASME J. Fluids Engineering, Vol. 132, 054502-1 – 054502-4, 2010.
  104. P. Waghmare and S. K. Mitra, “Modeling of combined electroosmotic and capillary flow in microchannels”, Analytica Chimica Acta, Vol. 663, pp. 117 – 126, 2010 (Cover Article).
  105. N. S. K. Gunda and S. K. Mitra, “Modeling of dielectrophoretic transport of myoglobin molecules in microchannels”, BioMicrofluidics, Vol. 4, 014105-1 – 014105-20, 2010.
  106. A. Saha and S. K. Mitra, “Effect of dynamic contact angle in a volume of fluid (VOF) model for a microfluidic capillary flow”, J. Colloid Interface Science, Vol. 339, pp. 461 – 480, 2009.
  107. A. Saha and S. K. Mitra, “Numerical study of capillary flow in microchannels with alternate hydrophilic-hydrophobic bottom wall”, ASME J. Fluids Engineering, Vol. 131, pp. 061202-1 – 061202-12, 2009.
  108. A. Mathur, S. S. Roy, M. Tweedie, S. Mukhopadhyay, S. K. Mitra and J. McLaughlin, “Characterization of PMMA microfluidic channels and devices fabricated by hot embossing and sealed by direct bonding”, Current Applied Physics, Vol. 9, pp. 1199 – 1202, 2009, 2009.
  109. A. Saha, S. K. Mitra, M. Tweedie, S. S.Roy and J. McLaughlin, “Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillars”, Microfluidics Nanofluidics, Vol. 7, pp. 451-465, 2009.
  110. P. Waghmare and S. K. Mitra, “Investigation of combined electroosmotic and pressure driven flow in rough microchannels”, ASME J. Fluids Engineering, Vol. 130, pp. 061204-1 – 061204-7, 2008.
  111. V. Santosh, S. K. Mitra, M. Vinjamur and M. S. Kumar, “Flow visualization of waterflooding with Horizontal and Vertical Wells”, Petroleum Science and Technology, Vol. 26, pp. 1835 – 1851, 2008.
  112. N. Hadia, L. Chaudhari, S. K. Mitra, M. Vinjamur and R. Singh, “Effect of Scaling Parameters on Waterflood Performance with Horizontal and Vertical Wells”, Energy Fuels, Vol. 22, pp. 402 – 409, 2008.
  113. N. Hadia, L. Chaudhari, S. K. Mitra, M. Vinjamur and R. Singh, “Waterflood profiles and oil recovery with vertical and horizontal wells”, Energy Sources Part A, Vol. 30, pp. 1604 – 1618, 2008.
  114. D. Marla, S. S. Joshi and S. K. Mitra, “Modeling of electrochemical micromachining: comparison to experiments”, Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3), Vol. 7, 033015-1, 2008.
  115. V. Agrawal, R. Devani and S. K. Mitra, “Identification of process parameters for micro-fabrication with Excimer laser”, Journal of Micro/Nanolithography, MEMS, and MOEMS (JM3), Vol. 6, 049701-1, 2007.
  116. V. Santosh, S. K. Mitra, M. Vinjamur, and R. Singh, “Experimental and Numerical Investigations of Waterflood Profiles with different well configurations”, Energy Fuels, Vol. 21, pp. 3353 – 3359, 2007.
  117. V. P. Malapure, S. K. Mitra and A. Bhattacharya, “Numerical investigation of fluid flow and heat transfer over louvered fins in compact heat exchanger”, Int. J. Thermal Sciences, Vol. 46, pp. 199 – 211, 2007.
  118. N. Hadia, L. Chaudhari, A. Aggarwal, S. K. Mitra, M. Vinjamur and R. Singh, “Experimental and numerical investigation of one-dimensional waterflood in porous media”, Experimental Thermal Fluid Science, Vol. 32, pp. 355 – 361, 2007.
  119. H. Nanji, L. Chaudhari, S. K. Mitra, M. Vinjamur, and R. Singh, “Experimental investigation of use of horizontal wells in waterflooding”, Journal of Petroleum Science and Engineering, Vol. 56, pp. 303-310, 2007.
  120. A. Saha, S. K. Mitra and X. Li, “Electroosmotic effect on flows in a serpentine microchannel with varying zeta potential”, Journal of Power Sources, Vol. 164, pp. 154 – 165, 2007.
  121. K. Bhambare, S. K. Mitra and U. N. Gaitonde, “Modeling of coal-fired natural circulation boiler”, ASME J. Energy Resources and Technology, Vol. 129, pp. 159 – 167, 2006.
  122. A. S. Rawool, S. K. Mitra and S. G. Kandlikar, “Numerical simulation of flow through microchannels with designed roughness”, Microfluidics and Nanofluidics, Vol. 2, pp. 215-221, 2006.
  123. A. S. Rawool and S. K. Mitra, “Numerical simulation of electroosmotic effect in serpentine channels”, Microfluidics and Nanofluidics, Vol. 2, pp. 261-269, 2006.
  124. A. S. Rawool, S. K. Mitra and J. G. Pharoah, “An investigation of convection transport in micro-PEM fuel cells”, Vol. 162, pp. 985 – 991, Journal Power Sources, 2006.
  125. M. V. Joshi, U. N. Gaitonde and S. K. Mitra, “Analytical study of natural convection in a cavity with volumetric heat generation”, ASME J. Heat Transfer, Vol. 128, pp. 176-182, 2006.
  126. S. Jaisiwal and S. K. Mitra, “Techno-economic review of fuel cells for Indian market”, Energy Engineering, Vol. 103, No. 3, pp. 55 – 76, 2006.
  127. P. P. Sajith, R. P. Vedula and S. K. Mitra, “An investigation of flashing driven natural circulation”, Int. J. Green Energy, Vol. 3, pp. 369 – 380, 2006.
  128. R. Sharma and S. K. Mitra, “Performance model for horizontal tube falling film evaporator”, Int. J. Green Energy, Vol. 2, pp. 1-19, 2005.
  129. W. T. Kim, S. K. Mitra, X. Li, L. A. Prociw and T. C. J. Hu, “A predictive model for initial droplet size and velocity distributions in sprays and comparison with experiment”, Particle & Particle Systems Characterization, Vol.20, pp. 135-149, 2003.
  130. S. K. Mitra, X. Li and M. Renksizbulut, “On the breakup of viscous liquid sheets by dual – mode linear analysis”, AIAA Journal of Propulsion & Power, vol. 17, No. 3, pp. 728-735, 2001.
  131. S. K. Mitra and X. Li, “A predictive model for droplet size distributions in sprays”, Atomization and Sprays, Vol. 15, No. 1, pp. 103-110, 1999.